Webb 1938323001, Оригинальное руководство пользователя, Страница: 20 / 42

STOPPING THE ENGINE
1. Release the OPC/Brake lever. The engine will come to a stop and a couple of seconds later, the blade will
stop rotating.
2. Or you can move the throttle lever to the STOP position.
SELF-PROPELLED (WER18HW4 ONLY)
To self-propel your lawnmower,
1. Start the engine as stated above.
2. Push the drive lever up to the main handle. The lawnmower will start to move with the engine running
and blade rotating. It is easier to manually push the machine a couple of steps and then engage the self-
propelled motion to ensure the grass is not damaged and the machine does not take off, away from the
user suddenly.
3. To stop the lawnmower moving, just simply release the drive lever in good time.
4. The self-propel speed has been set at the factory and cannot be adjusted.
MOWING WITH GRASS COLLECTOR
WARNING
Always observe the strictest safety procedures when using the lawnmower. Carefully read the safety
instructions of this manual before using the lawnmower.
Never open the rear flap when the grass bag has been detached (to be emptied) and the engine is still
running. The rotating blade can cause serious injuries!
1. Select your required height of cut setting.
2. Start the engine and allow it to run and warm up. See Starting the Engine section of the manual.
3. Keep a firm grip on the upper handle with OPC/Brake lever always engaged when attempting to cut.
4. Pull the Drive lever up to the handle when you wish to self-propel.
INSTRUCTION MANUAL