Webb 1938199001, Оригинальное руководство пользователя

Страница: 12 / 24

Instruction Manual
CLOGGING
• Release the locking screw (13).
• Fold down the housing cover (14) and remove any blockage within the fan housing.
• Once happy the fan can rotate, close the housing cover and fully tighten the locking screw. The housing cover is fitted
with a safety switch, which prevents the machine from operating if the locking screw is not completed secured.
STORAGE & TRANSPORT
DANGER
RISK OF INJURY! Make sure unauthorised persons do not have access to this machine!
STORAGE
•
For years of trouble free service, make sure the machine is clean and dry before storing.
• Before storing, clean the machine thoroughly as indicated within the Cleaning section of this manual.
• Store indoors, in a safe, locked protected area during severe weather and winter months. Keep away from direct
sunlight.
TRANSPORT
• Secure the device against slipping
TROUBLE SHOOTING
DANGER
RISK OF INJURY! Incorrectly performed repairs can lead to the device not functioning safely. This endangers yourself and
your environment.
Malfunctions are often caused by minor faults. You can easily remedy most of these yourself. Please consult the following table
before contacting the manufacturer or selling retailer. You will save yourself a lot of trouble and possibly money too.
If you can’t fix the fault yourself, contact us Tel: 01793 333212 or Email: customerservice@webbgardenpower.co.uk.
Please be aware that any improper repairs will invalidate the warranty and additional costs may be incurred.
Fault Cause Resolution
Will not start
No mains power (power failure). Check fuse
Motor or switch defect.
The cable should be checked and
replaced if necessary by a qualified
electrician or approved service dealer.
Material is not being
vacuumed properly
Suction tubes clogged or blocked.
Switch to blow mode and clear the
blockage.
Collection bag is full Empty the collection bag.
Extension cable, if used, is too long, or
the cable cross section is too small.
Use a shorter extension cable with a
cross section the same size or larger
than the standard cable on the machine.
Machine is vibrating abnormally
The fan has become unbalanced due to
the impact of a foreign object e.g. a
stone or gravel.
The fan needs to be replaced by an
approved service dealer. Please note
that this will not be covered under the
warranty, as the warranty does not
cover wear and tear or machines that
are damaged by the user.