Kia Carens
Ident. No.: 1321247A_EN
Status: 13.09.2013
© Webasto Thermo & Comfort SE
5
Preliminary Work
Vehicle
• Open the fuel tank cap.
• Ventilate the fuel tank.
• Close the fuel tank cap again.
• Depressurise
the cooling system.
• Remove the engine cover.
• Disconnect and completely remove the battery.
• Remove the battery carrier.
• Completely remove the air filter box.
• Remove the control unit.
• Remove the right headlight.
• Remove the bumper cover.
• Remove the underride protection of the engine.
• Detach the underride protection of the fuel lines on the left.
• Remove the left and middle seat of the second seat row.
• Open the tank-fitting service lid in the middle.
• Remove the fuel-tank sending unit in accordance with the manufacturer's instructions.
• Remove the lateral instrument panel trim on the front passenger's side.
• Remove the glove compartment.
• Remove the glove compartment trim.
• Remove the lower A-pillar trim on the front passenger's side (only for Thermo Call).
Heater
• Remove years that do not apply from the type and duplicate label.
• Attach the duplicate label (type label) in the appropriate place in the engine compartment.
Heater Installation Location
1
Heater
Installation
location
1
1