5
SmarTemp Control fx
The Webasto SmarTemp Control fx is controlled using a rotary dial around the outside of the unit to scroll
through menu options. Simply click the selection button to make your choice. The following sections will
define each menu item and its default setting.
Menu Descriptions
*Depending on SmarTemp version, menu order may vary from order below.
Definitions
Default
Mode
Two modes are possible:
–
Auto mode enables the pre-defined timer programs. Manual ON/OFF
functionality is still possible while in this mode.
–
Manual Mode allows the heater to be operated via the Webasto
button on the SmarTemp Control fx. While in Manual Mode, all Auto
Mode functionality is permanently disabled.
Note:
While in manual mode the heater will continue to operate based on the
pre-defined “Duration” set by the user. See “Duration” for further detail.
Manual
Language
Language changes between English, French, and Spanish
English
Duration
Duration allows user to select the heater runtime of the heater. Set range is
between 10 – 120 minutes selectable by 10 minute increments.
Note:
Duration time for all timers will default to the set duration time. User
will have the ability to manually change duration for each timer.
60 minutes
Error Code
This section will log the last 5 error codes and the date that it was set.
Highlight and select an error code for a full description.
If the heater produces an error code, the status indicator lights will flash red
and the error will display on the main screen. Error codes cannot be reset
through the Webasto SmarTemp Control fx on the heater, a Webasto PC
Diagnostics tool is needed. Refer to the heater service manual for resetting an
error code.
Note:
Diagnostics via blink code is not available on all coolant heaters. Error
Codes on products with no blink code functionality can still be obtained using
the PC Diagnostics test tool. Refer to the applicable service manual by visiting
www.techwebasto.com
for detailed PC diagnostics information.
No Errors
Options
Advanced Level adjustment; see below
