DVS Fast Charging System
Operation and Maintenance Manual
09910-W-03-02
Page
5 of 27
Webasto Charging Systems, Inc.
1
Overview
The DVS/MVS 330 Fast Charging System is an advanced charging system that quickly and
safely charge industrial batteries.
The charger’s Rapid Charging Intelligence (RCI) makes it capable of charging much more
quickly than a conventional charger without damage to the battery. Battery voltage and
temperature are monitored precisely, allowing charging to be as rapid as possible without
exceeding manufacturers' recommendations. The charge history of the pack is tracked and
equalization is automatically performed on the pack according to a pre-set schedule. This
results in better use of the batteries with minimal effort on the user’s part.
1.1 Getting Started
First, familiarize yourself with the caution symbols in Section 2. To get the system up and
running quickly perform the following steps:
1.
Ensure the DVS/MVS 330 Fast Charging System installation and utility power requirements
are followed.
2.
Install and program the Battery Monitor / Identifier (BMID) onto the battery pack.
3.
Once BMID is installed, the battery pack may be connected to the charger.
4.
If the BMID does not come pre-configured, initialize the new BMID.
5.
Once the BMID has been initialized, the battery pack is ready to begin charging.
1.2 Applicable Documents
TITLE
DVS/MVS 330 System Installation Manual
BMID Installation Manual
