Transportation and storage | 4
5111232A OI-II Webasto Next
7 / 23
3.3
Description of power supply interface
connections
The connections of the mains cable are marked with "IN". The 5
terminals on the left have L1/L2/L3/N/PE printed on them
The connections of the charging cable are marked with "OUT".
The 5 terminals on the right have PE/N/L1/L2/L3 printed on
them
NOTE
To release the power supply connections, use an insu-
lated flat-head screwdriver by inserting it into the open-
ing for this purpose immediately above push-in ter-
minal.
L3 L2 L1 N
PE PE
N L1 L2 L3
18 mm
L3/IN
L2/IN
L1/IN
N/IN
PE
PE
N/OUT L1/OUT L2/OUT L3/OUT
IN
OUT
230 - 400 VAC
Fig. 4
IN
Power cable connections
OUT
Charging cable connections
4
Transportation and storage
Observe the ambient temperature for storage during transporta-
tion. See chapter 17, "Technical data" on page 20.
Transport the charging station only when suitably packaged.
5
Scope of delivery
Scope of delivery
Amount
Charging station
1
Charging cable with charging coupling
1
Installation kit for wall mounting
l
Wall plug (8 x 50 mm, Fischer UX R 8)
4
l
Screw (6 x 70, T25)
2
l
Screw (6 x 90, T25)
2
l
Washer (12 x 6.4 mm, DIN 125-A2)
4
l
Screw (3 x 20 mm, T10); (2 replacement
screws)
2
l
Mounting bracket
1
l
Cable bushing, (one is custom-made)
2
Installation kit for charging cable:
l
Spiral antikink protection
1
l
Cable tie
1
l
Strain relief clamp
1
l
Screw (6.5 x 25 mm, T25) for fastening the
strain relief clamp
2
"Important Information on Operating and Installa-
tion Instructions"
1
"Scan & Charge" QR codes
2
NOTE
The Fischer universal wall plug UX R 8 supplied is a
plastic wall plug made of high quality nylon. The univer-
sal wall plug splays out in solid building materials and
catches in wooden and board materials for excellent re-
tention.
6
Required tools
Tool description
Amount
Slot-head screwdriver 0.5x3.5 mm
1
Torx screwdriver Tx25
1
Torx screwdriver Tx10
1
Torque wrench (range covers 5-6 Nm, for Tx25)
1
Torque wrench (range covers 4-5 Nm, for open-
ended spanner size 29)
1
Drilling machine with 8 mm drill
1
Hammer
1
Measuring tape
1
Spirit level
1
Wire stripping tool
1
Installation tester
1
EV simulator with rotary field display
1
Round file
1
Combination pliers
1
NOTE
A drill template, which likewise forms part of the scope
of delivery, is also available to print out. It must be prin-
ted on a 1:1 scale. Check the dimensions after printing.
