Air Top Evo 3900 / Air Top Evo 5500
Technical data
93
16
Technical data
Except where limit values are specified, the technical data refer to the usual
heater tolerances of
±
10 % at an ambient temperature of + 20 °C and at
the rated voltage and in rated conditions.
16.1. Electrical components
Control unit, motor, metering pump, lamp in the timer and glow plug /
flame monitor are designed for either 12 V or 24 V.
The timer, overheating sensor and temperature sensor component are not
dependent on voltage.
16.2. Fuel for Air Top Evo 3900 B (petrol)
Fuel for Air Top Evo 5500 B (petrol)
The fuel specified by the manufacturer in accordance with DIN EN 228
must be used
16.3. Fuel for Air Top Evo 3900 D (diesel)
Fuel for Air Top Evo 5500 D (diesel)
The diesel fuel specified by the manufacturer in accordance with DIN EN
590 must be used.
We know of no negative influences due to additives.
If fuel is extracted from the vehicle’s tank, follow the additive instructions
issued by the vehicle manufacturer.
If you change to low-temperature fuel, the heater must be operated for ap-
prox. 15 minutes so that the fuel system is filled with the new fuel.
The Air Top Evo 3900 and Air Top Evo 5500 D heaters are also licensed for
use with PME (bio-diesel), which complies with DIN EN 14214 .
Installation_Instructions_Air_Top_Evo_3900_5500_de_en_nl.book Page 93 Wednesday, November 3, 2010 11:58 AM
