Air Top Evo 3900 / Air Top Evo 5500
Electrical connections
77
11.5. Installation Instructions for Control Panel MC04/05
Install control panel:
The control panel should be installed in a suitable location (on a flat surface
if possible) in the area visible to the driver.
– Use Drilling Template for control panel MC04/05 for cut-out and holes
(see chapter 17, "Drilling templates");
– Connect control panel to existing connectors on heater-unit wiring har-
ness (see chapter 12, "Connection diagram/Circuit diagram");
– Premount control unit in cut-out;
– Lightly press fastening screws into holes and screw in;
– Carefully clip on trim frame.
NOTES:
– control panel is only intended for installation in passenger compart-
ment;
– Ensure good readability when selecting installation location;
– Observe information on adhesive labels and coloured markings when
connecting control panel to vehicle wiring harness.
Fig. 30
Installing Control Panel MC04/05
Installation_Instructions_Air_Top_Evo_3900_5500_de_en_nl.book Page 77 Wednesday, November 3, 2010 11:58 AM
