Webasto Air Top 5000 ST Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 32

Webasto Air Top 5000 ST Скачать руководство пользователя страница 5

2.

General Description

2.1

General Description

Fig. 2-1:

Webasto Air Top 5000 Air Heater

A

IR

T

OP

5000

2

G

ENERAL

D

ESCRIPTION

2-1

World class technology with ease of installation, maintenance and operation has made the Air Top 5000 heater a popular
choice among fleets, drivers and technicians.

The Webasto Air Top 5000 heater is designed to be used on any gasoline / diesel equipped vehicle, including trailers,
vans, buses, boats, van bodies, construction, off-road and military equipment, generators and as independent heating
systems.

Webasto air heaters for the following applications:

1. Cargo Heating: The Air Top 5000 can be used an as independent heating system to protect temperature sensitive /

valuable products from freezing (produce, beverages, etc.). Webasto cargo kits are supplied with an installation
instruction supplement to cover the specific requirements of this application.

2. Marine: The Air Top 5000 can be used as the primary heating source for watercraft. Boat installations may only be

performed by a Webasto authorized marine dealer. It is the authorized marine dealer’s responsibility that the
installation complies with all applicable Coast Guard regulations. Webasto Product North America, Inc. can provide
you with information concerning watercraft installations, and a selection of Marine dealers to serve your needs.
Call 1-800-555-4518 for assistance.

«
...
3
4
5
6
7
...
»

Содержание Air Top 5000 ST

































Отзывы:

Нет отзывов