FIGURE 7A
FIGURE 7B
FIGURE 8
FIGURE 9A
FIGURE 9B
FIGURE 10
FOR USE:
• To adjust front legs, ensure thumbscrews are loose and extend legs to desired position;
tighten thumbscrews to lock into place.
Figures 7a & 7b
• Plastic chain wraps around headpiece for safe storage and is secured with a square hook. Figure 8
**For replacement head chain, see:
Trimming Stand Headpiece Conversion Kit (80-1060-BK).
Plastic Goat Chain (80-1020-WH), (80-1021-WH), or (80-1022-WH)
FOR DISASSEMBLY:
• Ensure adjustable front legs are fully collapsed and
tightened in place.
• Remove headpiece from slot and place off to the side.
• Flip the stand over onto top for easy access to folding
mechanisms.
• Remove pin from center brackets to release
cross-support bars.
• Fold legs in, ensuring that the cross-support bars fold
under the leg frames and rest in the center brackets.
Replace pin and lock with wire snap to secure legs in
folded position. Figures 9a & 9b
• For safe and easy headpiece storage, insert shaft into
slot so that headpiece lies across the folded structure
(not outwards) and tighten into place with thumbscrew
– it should be flush with the platform and not sticking
out. We recommend that the stand and headpiece be
stored together and attached as such. Figure 10
DISASSEMBLY
20-3590-LV-OTR
3
WeaverLivestock.com
** The minimum animal height measurement is
30-1/2", measured from top of platform to jaw
bars – to reflect animal height from hoof-to-jaw.
Headpiece adjusts for increased height requirements.
