Instruction Manual
easyRESCUE-PRO
Page 22 of 35
Weatherdock AG | Sigmundstraße 180 | D-90431 Nürnberg
+49(0)911-37663830 | [email protected] | www.easyais.com
All LEDs glow
You hear beep
–
beep
–
beep
The yellow LED remains glowing (all other
LEDs shut down)
All LEDs start to glow.
After a few seconds you hear the inter-
nal buzzer beeping three times. In par-
allel to the buzzer all LEDs except the
yellow LED stop glowing.
The constantly glowing yellow LED
indicates, that the easyRESCUE-PRO and
the VHF-DSC Radio can be paired now
(programming mode). This status lasts
for 1 minute. During this time period
the easyRESCUE-PRO can be pro-
grammed.
If no pairing has been performed during
this time period, the unit shuts down
automatically. If you miss this time peri-
od, you have to restart the program-
ming procedure.
VHF DSC Radio:
Chose the
„CALL“
function with your
VHF DSC Radio.
Chose
„INDIVIDUAL“
call.
Chose
„ROUTINE“ call.
Chos
e „MANUAL NEW“.
Insert now the easyRESCUE
’s MMSI into
the VHF DSC Radio
Unit ID: 972 _ _ _ _ _ _
Confirm the inserted MMSI with
„ENTER“ and continue with „SEND“.
The transmitted telegram is now re-
ceived by the easyRESCUE-PRO and the
MMSI of the transmitting VHF DSC Ra-
dio is stored into the easyRESCUE-PRO
as a new mother
ship’s MMSI. The
easyRESCUE-PRO
is
automatically
Содержание easyRESCUE-PRO
Страница 2: ......
