Quick Instruction
Anschließen leicht gemacht
6 of 33
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.:+49 911 376638-30 www.easyAIS-IS.de
1.2.
easyAIS-IS
Thank you to buy an easyAIS-IS from the company Weatherdock AG. It is
the latest and the best available unit in the market. The core features
are:
2 channel parallel AIS receiver with integrated splitter/amplifier.
latest microprocessor technology
Highest sensitivity (-112dBm) at optimized selectivity
Integrated multiplexer upconverting GPS messages from 4,8kB
to 38,4kB
Serial and USB Interface
Extended DC power input range from 9-28VDC
1.3.
Use of easyAIS-IS
It is very simple to use. Just connect the unit to your mast antenna and
your VHF Radio. No further coaxial cables are needed for VHF/AIS
operation. As an option an additional coaxial output can be used to
feed an external broadcast receiver (FM/SW/MW and LW).
Install the DC supply to your boat’s mains, the serial data cables to your
Chart plotter and if favoured the USB interconnection to your
PC/notebook.
The Green LED shines after correct connection to the boat mains power.
The Channel A/B LED is flickering each time an AIS signal is received on
channel A or B.
The VHF-LED is shining each time you transmit with your VHF-Radio.
