Quick Instruction
Anschließen leicht gemacht
10 of 33
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.:+49 911 376638-30 www.easyAIS-IS.de
Please find details of the settings in your chart plotter manual. The chart
plotters differ slightly from each other.
Nevertheless the main settings of your input NMEA port should be:
Select the right input port at your chart plotter. (Some are equipped
with up to 3 and more input/output channels.)
Set the port data rate to 38400 Baud. Set the input port of the chart
plotter to the following bit configuration: 8/N/1
1.5.3
Connection to the PC/Notebook and
settings
1.5.3.1
Serial connection to the PC and settings
There are two ways to connect your PC/Notebook to the easyAIS-IS:
You either make use of the serial RS232-port of your PC/Notebook
(normally this is a SUB D-9 male built-in socket), or you can use a free
USB slot.
Serial connection via RS232 socket:
Connect the white cable ending (NMEA out +) to pin 2 and the green
cable ending (NMEA out -) to pin 5 of a SUB D-9 female plug and
connect it to RS232-interface of your PC/Notebook.
1.5.3.1
USB connection to the PC and settings
You only have to install the USB-cable (enclosed in the package)
between the easyAIS-IS and the USB port of your computer.
