WeatherBug Weather Station, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 39

Weather Station Manual
AWS-WXN-60003.001 Version 1.0, Release 5 November 2004
- 16 -
Installation
Hardware and Tool Requirements
The following hardware (equivalent or better quality) is required to install the WeatherBug
Weather Station. If you are using a contracted installer, they will provide these materials.
Required Parts Not Included
•
Mounting hardware (heavy-duty wall mounting brackets)
•
Grounding cable and appropriate connectors
•
Silicone caulk (to seal conduit and cable entry points into building)
•
Mast
o
Galvanized Rigid Conduit (GRC) approximately 1/8 inch thickness
(painted optional)
o
1 ¼ inch maximum outside diameter (at top of mast)
o Must be approximately 15 feet total length
o
Mast can be comprised of two sections that total 15 feet. A two-section mast
is recommended so the top section can be raised/lowered for easier
installation and maintenance of the weather sensors. The bottom section
should remain securely fastened.
o
The top section should be secured to the bottom section using two bolts.
•
Grounding rod, if necessary (unit MUST have an “earth” ground)
•
Conduit for exterior data cable
o
Select conduit type based on your state's building codes
o
1 ¾ inch outside diameter for weather station data (and camera) cable
For your convenience, specifications on the parts and tools you will need can be found at:
http://downloads.aws.com/manuals/partsrequired.pdf