Weather-Rite XT112, Инструкция по установке, эксплуатации и обслуживанию

Страница: 93 / 98

SECTION 24: WEATHER-RITE ™ XT-S
ERIES
S
TART
-U
P
P
ROCEDURES
87
SECTION 24: WEATHER-RITE ™ XT-SERIES START-UP PROCEDURES
Date of Installation _____________ Model # ____________ Serial # _______________
XT-Series Start Up Form
Installed at:
Name: __________________________________
Address: ________________________________
Phone: __________________________________
Fax: ____________________________________
Ser v ice Company
Name: __________________________________
Address: ________________________________
Phone: __________________________________
Fax: ____________________________________
Notice: Please ret u rn a completed copy to Weather-Rite™ LLC. If this doc u ment is not ret u rned, the man u fact u ring date w ill be u sed as the w arranty
start date.
Receivin g Inspection
Check installation site to ens u re all codes and engineering
specifications are correct. Place a check next to line items
completed or enter data.
1. Inspect air handler and all accessories for possible
shipping damage.
No Damage___ Damaged ___.
(Specify on separate sheet.)
2. Check packing list against items recei v ed.
OK ___ Missing items ____ (Call factory.)
3. Check all n u ts, bolts and fasteners to ens u re they are
tight. OK ____ Loose____ (Specify.)
4. Check shea v es, set scre w s and bearing collars. Make
s u re they are tight.
OK ____ Loose ____ (Specify.)
5. Compare v oltage on u nit rating plate to job site v oltage.
Job Site Voltage ______/____/_____.
6. Compare gas type and s u pply press u re on u nit
rating plate to job site gas s u pply.
Job Site Gas Type____ S u pply Press u re_______
Explosion Hazard
Leak test all compo-
nents of equipment
gas piping before
operation.
Gas can leak if
piping is not
installed properly.
Do not high pressure
test gas piping with
equipment
connected.
Carbon Monoxide
Hazard
Do not recirculate air
from the heated
space over burner.
Air supply to burner
must be from outside.
Falling Hazard
Use proper safety
equipment and
practices to avoid
falling.
Do not use any part
of equipment as
support.
Burn Hazard
Allow equipment to
cool before service.
Internal components
of equipment may
still be hot after
operation.
WARNING
Failure to follow these instructions can result in death, injury or property damage.
DANGER
Electrical Shock Hazard
Disconnect electric before service.
More than one disconnect switch may be
required to disconnect electric from
equipment.
Equipment must be properly grounded.
Failure to follow these instructions can result
in death or electrical shock.