RACK INSTALLATION
STEP 13
Install the front (cab side) mounting feet to the truck bed. Place the mounting foot onto the truck bed placing the foot as far forward
as possible. Find the most appropriate hole that aligns with the center of the stake pocket. Insert the hardware, using (1) Part J,
(1) Part C, and (1) Part M, into the stake pocket and thread the stake pocket bracket (Part J) to the end of the bolt.
Insert the stake pocket bracket into the stake pocket by tilting the foot assembly and inserting the bracket diagonally into the stake
pocket. Loosely tighten the stake pocket bracket then install the no drill mount bracket (Part E) to the rear most mounting foot
clamp insert hole using (1) Part A, (1) Part K, and (1) Part E. Tighten hardware, making sure mounting foot is secured to the bed rail.
6
NOTE
: The front driver side foot is the same as the rear passenger side foot. The front passenger side foot is the same as the rear driver side foot.
©2019 Werner Co.
STEP 11
Apply the rubber protective strip to the
top of each of the cross members.
STEP 12
Insert all 8 plastic plugs
(Part I) into the holes
of the front legs.
PRO TIP
:
1.
When installing the mounting feet and
utilizing the stake pocket bracket, always
use the furthest no drill mounting
location from the stake pocket when
possible. If your bed has structure in the
way of installing the no drill bracket in
the furthest mount from the stake
pocket, use the center mounting
location.
2.
If your truck does not have stake
pockets, use 2 no drill brackets. Always
use the closest mounting location to the
leg, as well as one of the other 2
locations. When possible mount using
the outer most mounting locations.