7
ASSEMBLY
Step 6: Installing front door and back panels
●
Install the front door panel (19) first. During installation, ensure the zipper
of the front door panel (19) is closed, for easier installation (fig. 13).
13
14
●
To make sure the strap will stay in the sleeve when assembly
●
Raise and lower the handle two or three times to wind the strap onto the
spindle (fig. 15).
16
thread the strap through the spindle of the ratchet(fig.14) .
WARNING!
●
Do not thread poles through the sleeves. To tighten,
wrap the outer sleeves around poles and tighten
using the straps provided (fig. 16).
19
Zipper
5
18
4
Front door panel (19)
(inside view)
14
15
●
Locate the top part of the front door panel (19) near the 3-way peak
connector (11), disconnect the shoulder cross rail (4) from the 3-way
peak connector (11), and pull the strap onto the connector (11). Then
re-insert the cross rail (4) to its proper position (fig. 17).
●
Attach the other two corners of the front door panel (19) to the 3-way side
connectors (8, 9) in the same way(fig.18).
17
11
4
Strap inside the panel
4
9
●
Insert the S-hook of the ratchet into the hole of the bent corner leg (3).
Pump the ratchet handle repeatedly to tighten the strap (fig. 19).
Strap inside the panel
3
19
fig.17
fig.18
fig.19
