5
ASSEMBLY
Step 1: Assembly the two end ribs
●
1
2
Step 2: Attach the cross rails
●
17
18
15
1
2
5
3
2
5
3
17
18
15
1
2
5
2
5
6
6
●
5
10
9
10
9
9
9
Connect the 7 tubes together (1pc tube #1, 2pcs tube #2, 2pcs tube #5
and 2pcs bent legs #3) to form 1 End Rib (fig.1).
Repeat to get the other End Rib.
●
Assemble the center rib.
Connect the 7 tubes together (1pc tube #1, 2pcs tube #2, 2pcs tube #5
and 2pcs tube #6) to form 1 center rib fig 2 .
( . )
First insert the male end of tube #9 into tube #10, the male end of tube
# 11into the other end of tube #10 (fig.3).
11
11
Connect the other end of tube #9 to one end rib with tube connector #12
by fittings #16, #17 & #18. Connect tube #10 & #11 to center rib as
(fig.4).
before
●
3
16
17
18
12
9
2
5
Repeat to assemble the other side cross rail.
●
Insert the male end of tube #9 into tube #11. Connect the other end of
tube #9 to the other end rib with tube connector #12 by fittings #16,
#17 & #18. Repeat to assemble the other side cross rail (fig.5).
●
Repeat the same procedure to assemble the top cross rail (fig.6).
●
11
9
10
9
6
Connect tube #7 and tube #8 together.
●
NOTE:
●
Do not let the roof rest on the legs until all three legs
on one side are completely installed and in place.
Step 3: Attaching bottom cross rails
●
Attach the bottom cross rails #7, 8 to the legs and cover the joints with the
#
cross rail clamps #13,#14. Align all holes and insert the fittings #15, #18,
#17 (fig. 7). Do not tighten fully at this stage.
4
14
7
8
7
8
13
14
7
8
7
8
7
3
8
18
17
15
7
13
14
7
Repeat the same procedure on the opposite side.
●
●
Adjust the bottom cross rails #7,#8 so that they are of same height from
the ground. Do not tighten fully now.
Connect tube #1 and #2 by fittings #15, #17, #18.