Version 3 - 12/22/2011
Page 9 of 26
Please follow the directions on the screen to register the gateway. A few tips:
•
Download the software
and install, as directed.
•
When you are
instructed to do so,
insert the USB gateway
in your USB port.
•
Proof-read the serial number prompted after
the USB Gateway software installs against
the number printed on the gateway.
Note
: The pictures came from 2 different
devices, so they can’t match in the example
.
Yours must match!
Note: If you do not see the “Welcome”
screen (above) and you did not yet
register the USB gateway, press the
Factory Reset button on the USB-ERF-
Gateway software. This will reset the
USB gateway and display the serial
number it reads inside the gateway.
