The active connection type is indicated by the
illuminated text (
or
)
on the HearLink PLUS
front display panel.
OPT
AUX
Make sure to remove the plastic protectors from
the optical cable terminals prior to insertion.
Remove for
Bypass use
AUX OPT
3
.
Connect the HearLink PLUS TX port to the TV (or other
media device) via the supplied optical or 3.5mm audio
cable.
TX
2.
Ensure that the Mode switch is set
to the
TX
position.
Purchased separately
1.
Connect HearLink PLUS to a power outlet (A) or the TV
set’s USB port (B) using the supplied USB power cable.
HearLink PLUS will turn ON automatically.
Setting Up HearLink PLUS
3
Subsequent connections should be automatic. If not,
for BeHear headsets, a short press on the headset's
Power button
should re-establish the connection.
4
.
When pairing is complete (after 5-30 seconds) will
be illuminated on the HearLink PLUS front display
panel.
The is illuminated to indicate that the Low Latency
APTX-LL Bluetooth CODEC is being used.
Successful connection of the headset is indicated by
the illuminated
on the HearLink PLUS front display
panel.
TX
LL
A
Bluetooth headset
1.
Place
HearLink PLUS into pairing mode with a short
press on its button. When in pairing mode the
indicator light will flash quickly.
2.
Place your Bluetooth headset in “pairing” mode. Refer to
the headset’s technical documentation for pairing
instructions.
3.
Place the Bluetooth headset close to the HearLink
PLUS device.
TX
First Time Connection
4