25.59
12.80
2.36
Tools required
– Screwdriver with 4 x 1.0 mm blade
– TORX key TX25 / TX30 / TX40
Post Top Luminaire
IP66, IK08
ø 0.354 – 0.551 in
Light source
18 LED 18W / 18 LED 36W / 18 LED 54W*
* Nominal power, for latest data refer to
www.we-ef.com
Class I, ta = 40 °C
Mounting height. . . . . . . . . . . . . . . . . . . . . . 10 – 20 ft
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . max. 18.5 lb
Windage area . . . . . . . . . . . . . . . . . . . . . . max. 0.50 ft²
Installation: horizontal, light output downwards
16 AWG
RMC320
120-
277 V
Installation
The product must be installed and maintained by
a suitably qualified professional in compliance with
latest building/construction and/or electrical regu-
lations and relevant legislation.
Attention:
Do not open luminaire while mains
supply is switched on.
Notice:
If the luminaire is modified by anybody
other than the original manufacturer, then the
warranty will no longer be valid and shall become
the full responsibility of the modifying person/
organisation. Claims based on defects attributable
to improper installation and/or application, and the
consequences thereof, are excluded.
In case of component failure, LED replacement
due to abnormal circumstances or at end of life,
replacement must be carried out by a suitably qua-
lified and trained professional.
In case of questions please contact our technical
hotline: +1 724 742 0030 (from Monday - Friday
from 08.00 until 16.00 hours).
Maintenance
Apart from cleaning the product’s exterior surfaces,
no special maintenance work is required. Do not
use high-pressure cleaners.
Protect our environment: Discard used LEDs in
compliance with the most recent environmental
legislation.
