4
Installation Instruction
1) Note: It is the responsibility to installer to
ensure the suitability of the ESV planted root
for any local or national structural requirements
for installation, and that planted root is suitable
for site speci
Ƃ
c conditions.
Instructions are a guideline for installation to
these requirements and provide detail for
installation orientation and mounting details.
4) For ESV2 please orientate bolt pattern as
shown (base plate is parallel to the pathway).
For this installation, use 30 mm long M12
bolts supplied.
2) Please note, ESV4 must be orientated correctly
for different products. In both instances conduit
entry can be rotated to match cable routing.
When the ESV is being installed for following
products: KTY234/KTX234/ZFY230/ CFY259,
please orientate the bolt pattern as shown
(base plate is 45° to the pathway).
For this installation, use the 40 mm long M8
bolts supplied.
3) For all other product that use ESV4 please
orientate bolt pattern as shown (base plate is
parallel to the pathway). For this installation,
use 25 mm long M8 bolts supplied.
