WE-EF LTM440-FT, Инструкция по установке и обслуживанию

Страница: 4 / 14

3
Installation
The product must be installed and maintained by a
VXLWDEO\TXDOLƂHGSURIHVVLRQDOLQFRPSOLDQFHZLWKODWHVW
building/construction and/or electrical regulations and
relevant legislation.
Warning:
Switch off mains electrical supply prior to
installing and connecting the luminaire.
Notice:
,IWKHOXPLQDLUHLVPRGLƂHGE\DQ\ERG\RWKHU
than the original manufacturer, then the warranty will
no longer be valid and shall become the full respon-
sibility of the modifying person/organisation. Claims
based on defects attributable to improper installation
and/or application, and the consequences thereof, are
excluded.
Installation Procedure
It is recommended to incorporate the optional WE-EF
planted root to ensure maximum stability.
1) Switch off mains electrical supply.
2) Check that rating shown on luminaire label conforms
with mains electrical supply.
3) A suitable recess to be provided for the planted
root
A
. Ensure that a solid foundation as well as
VXIƂFLHQWPDLQVFDEOHOHQJWKDUHSURYLGHG
4) Remove covers
B
from cast base
C
by loosening
screws
D
.
5) Set luminaire in position and secure by inserting
and tightening bolts
I
.
6) Place luminaire head
H
over post
P
, insert plug
G
into socket
K
and tighten screws
J
evenly.
7) Loosen screw
N
until door
M
can be opened and
removed.
8) Loosen screw
Q
and remove cover
R
of cable con-
necting box
L
.
9) Connect mains cable
F
to terminal connector
E
,
secure it with strain relief
O
and place back cover
R
.
10) Close door
M
and tighten screw
N
.