4
Installation Procedure
The luminaire is suitable for installation directly on
to an even surface, however it is recommended to
incorporate the optional planted root to ensure
maximum stability.
Installation – KTX
1) Switch off mains electrical supply.
2) Check that rating shown on luminaire label conforms
with mains electrical supply.
3) A suitable recess to be provided for planted root
A
.
Ensure that a solid foundation as well as suf
Ƃ
cient
mains cable length are provided.
Note:
Planted root installation instruction is
available at the end of this document.
4) Remove head of luminaire
H
from bollard post
B
after loosening screw
J
with Torx T-20 tool and
rotating it anti-clockwise until it can be lifted up.
5) Set bollard post
B
in position and secure by insert-
ing and tightening bolts
I
. The direction of light for
KTX [R65] is opposite the set screw
J
.
6) Connect luminaire cable
E
to mains supply cable
F
in watertight terminal connector
G
(not supplied by
WE-EF):
a) ON/OFF (L = Phase, N = Neutral, = Earthing)
b) 1-10V/DALI (L = Phase, N = Neutral,
= Earthing, DA/DA = DALI control line,
D-/D+ = 1-10V control line).
7) Place watertight terminal connector
G
and excess
cable inside bollard post
B
.
8) Return head of luminaire
H
to bollard post
B
and
secure by tightening screw
J
.
Содержание KTX234 LED
Страница 6: ...5 KTX234...
Страница 8: ...7 KTY234...
Страница 11: ...WE EF LEUCHTEN Installation and Maintenance Instructions Planted Root ESV4 ESV2 ESV6...