6
5) Turn luminaire towards object to be
LOOXPLQDWHG(QVXUHVOLSĥWWHULVSURSHUO\
seated on pivot, then tighten screw A.
6) Loosen screw N. Aim luminaire in desired
direction and tighten screw N.
)RUĦDWVXUIDFHĥWWHUFROXPQĥWWHUDQG
ground spike: Tighten cable gland D.
8) For accessory Linear Spread Lens IO-180:
Turn frame O to set desired orientation of light.
7) Connect mains supply cable G leads to
respective terminals in terminal connector C:
For FLC301
a) ON-OFF (L = Phase, N = Neutral,
= Earthing)
b) ON/OFF 24VDC (+ = positive pole,
ŝ
= negative pole)
c) DALI 24VDC (+ = positive pole,
ŝ
= negative
pole, DA/DA = DALI control line,
= Earthing)
For FLC311/321
a) ON-OFF (L = Phase, N = Neutral,
= Earthing)
b) 0-10V 24VDC (+ = positive pole,
ŝ
= negative pole, D
ŝ
/D+ = 0-10V
control line)
c) 1-10V/DALI (L = Phase, N = Neutral,
= Earthing, DA/DA = DALI control line,
D
ŝ
/D+ = 1-10V control line)
O
Operation with 24VDC is only permitted with a
SELV power supply suited for Class III appliances.
