34 / 45
6
Assembly and Connection
Risk of injury
In the event of defects or damage to the machine, it must be shut down immediately and secured
against unintentional or unauthorized startup. The machine may only be put into operation if it is
in perfect technical condition.
6.1
Assembly
Danger of crushing due to the machine falling down / over.
Wear suitable safety shoes when transporting and setting up the machine.
Set up the machine on a level surface and ensure that the machine is stable.
Slip, trip and fall due to incorrectly routed cables.
Place the foot switch on the floor, any other placement of the foot switch than on the floor is
prohibited!
Do not lay the foot switch and cables in traffic routes!
Disturbance of the musculoskeletal system due to insufficient access to the control parts.
The access to the actuating parts of the machine must be kept free. This applies in particular to
the foot switch and the reset button.
To reduce the operating noise, you can place the machine on a non-slip rubber base.
WARNING
WARNING
CAUTION
CAUTION
INFO
Fig. 6.1.1
Fig. 6.1.2
