WDR D&N Series, Руководство пользователя

Страница: 8 / 20

BNC
- Video output
Black Color
- Power input
> Alarm
> RS485
- As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
- If necessary, you can connect the monitor to the REMOTE jack on the back of
your camera.
- Only connect the cable when the power is turned off.
- Set the 75
Ω / Hi-Z selection switch as shown below if you have an intermediate
device.
VIDEO
1) Connection to Monitor and Power
2) Connection to Power
Connect the adaptor to the power input connector
as shown in the figure right. The Standard voltage
for camera operation : DC 12V ± 10%, AC 24V±10%.
Note
Before connect the power jack , please really have a check the power supply.
Connection
VIDEO
24VAC
Flex IR Vandal Dome Series
11 12
3) Connection to UTP
If you select the UTP camera , you can connect the video signal like below.
When you use the utp camera , please make sure Yellow color jack is video
-
output and the black color jack is power input.
Connection
NOTE
Flex IR Vandal Dome Series
1) Yellow color : Video output
2) Black color : Power input
UTP CAT 5/5E
UTP Board
VIDEO VIDEO
Camera
4) Connection to CCVC controller
If you have a CCVC controller, please connect like below, and easy control the
function by the CCVC controller.
Monitor
BNC
- Video output
Black Color
- Power input
> Alarm
> RS485
VIDEO
Hi-Z 75
Ω
IN
OUT
VIDEO
Hi-Z 75
Ω
IN
OUT