WDR D&N Series, Руководство пользователя

Страница: 7 / 20

Installation
Step1. Use the Mounting Template to make the hole on the ceiling, and then fix
the Base Housing to the desired place with screws supplied. After cable and base
connected, before body to the base , please have a check the hole
between body and base, please see
the below picture.
Ceiling
Step 1
Step 2
Step2. Adjusted lens and function by
using the 3 Axis bracket and osd board.
After everything nice, cover the front-cover
to the base by screws that supported.
Flex IR Vandal Dome Series
9 10
Installation Flex IR Vandal Dome Series
1. Fix the Base Housing to the desired place with screws supplied.
2. Power Connect & Monitor Impedance.
Made sure which power supply that you selected before you use.
- DC12V regulated power supply (DC12V camera only)
Dual power supply (AC24V/DC12V both can be used)
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75½. Check the impedance switch when
the screen turns blurred.
3. Focus and Functions Adjust
- Open the front cover , and connect the power , and use the extra cable to adjust
the focus and others functions . After finished, please tighten the front cover carefully.
4. Adjust desired scene by turning and moving the camera bracket and fix it with
Stopper Ring by turning it with hands.
5. Put the front-cover over the Base Housing.
6. If you install the flush type camera, please check the below way.
Flush type
Ceiling
Ceiling
Ceiling