The functions, features and settings of the Angel
are controlled by a 3 directional navigation switch
located on the rear of the grip frame. The switch
can move up and down to scroll through features
and settings indicated on the display and can be
pressed in to select the highlighted function or
setting required.
Navigation switch
•
Ensure that the Angel is off.
•
If required switch the Angel off by pressing and
holding the navigation switch in for 1 second.
A goodbye message will be displayed on the screen
and the Angel will power down.
•
Remove the right hand grip cheek
by removing
the 3 screws
using a suitable 2mm Allen key.
•
If a battery is already present carefully lift the
battery
from its housing.
•
Observe the battery polarity as marked on the
battery housing terminal and on the battery.
Always use a good quality fresh battery.
Replacing the 9v battery
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
· Ensure a barrel blocking device is fitted to
the ANGEL.
· Ensure the hopper is removed from the
ANGEL.
· Ensure that there are no paintballs in the
ANGEL.
· Paintball industry standard eye/face/ear and
head protection designed specifically to stop
paintballs and meeting ASTM standard F1776
(USA) or CE standard (Europe) must be worn
by user and any person within range.
· SHOULD YOU BE UNSURE AT ANY STAGE YOU
MUST SEEK EXPERT ADVICE.
The navigation switch is
located on the rear of the
grip frame and allows
access to the Angel 1
internal menu option.
Push the switch up or down
and hold for 1.5 seconds.
To navigate through the
options simply push the
switch up to scroll up and
push the switch down to
scroll down. Press the
switch inwards to make
a selection.
