OP
ER
A
TI
ON
Roll the TUF-Lugger™ into the desired operating location.
4
Grasp the spare Locking Pin and
tilt the TUF-Lugger™ rearwards
until it rests on the base plate.
6
6
Uncoil and unload the footswitch cord and power cord.
5
Remove the Locking Pin and rotate the Extension
Arm assembly to the desired position. Continue to
rotate past the desired position until the next set of
pin holes aligns. Replace the Locking Pin.
7
Remove the existing Duct Guide by removing the Guide Pins and Wrist Pin.
8
Select a Duct Guide suitable for the size of conduit being used.
9
