The Tuf Lugger is powered by our Tuf-lugger Lite 41000-500 winch, which can be
removed from the frame and used independently as a 41000-500 Tuf-Lugger Lite lifting –
electric winch. For additional information on the Tuf-lugger lite assembly, reference the
42000-500 Tuf-Lugger Lite manual provided.
Ensure the winch is unplugged from power before proceding to avoid any
physical harm or injury.
Remove the bolt, nut and washers from
the back of the winch in the location
shown. Once removed, the winch can
be moved forward (towards the
capstan) to allow the chain to be lifted
off the winch.
A
C
C
ES
S
OR
IES
F1
20
Remove the gear from the winch and,
using the same hardware, replace the
gear with the capstan provided.
Re-install the washers, nut and shorter
bolt, this time with the red hooks
provided.
The reverse process can be followed to
re-install the winch to the frame.
F2
Tuf-Lugger Lite removal from Frame
