wbox DVR 160, Руководство пользователя, Страница: 13 / 92

DVR 160 User Manual | 13
1.4.2 Universal Remote Control
1. Programming your device (MANUAL)
Configure your devices ( , , ) with 3-digit code.
1) Press one of the device buttons ( , , ) you want to program and OK ( ) together
and hold both for about 2 seconds.
2) Release the device and OK buttons. Now the device button LED is on.
3) From Brand List, enter the right 3-digit code and then press and release OK
and then the device button blinks 3 times and turns off.
4) If you enter wrong code and press OK, the device button LED will remain on after blink one time.
2. Programming your device (AUTOMATIC)
Configure your devices (TV, VCR, DVD) automatically.
1) Turn on the device ( , , ) you want to program on the universal remote control.
2) Press one of the device buttons ( , , ) you want to program and OK ( ) together and
hold both for about 2 seconds.
3) Release the device and OK buttons. Now the device button LED is on.
4) Press and release CH+( ) or CH-( ) repeatedly until the device turns off.
5) Press and release OK button and then the device button blinks 3 times and turns off.
3. Volume Punch Function
You can control [ ], [ ] & [ ] of TV when you use other devices.
1) Press one of the device buttons ( , , ) you want to program and OK ( ) together
and hold both for about 2 seconds.
2) Release the device and OK buttons. Now the device button LED is on.
3) Press and release [vol+] button
4) Press and relase the device button you want to use the Volume Punch function with. The device
button bliks 3 times and turns off.
5) If you want to stop this function, do the same steps from 1) to 4) again.