WBOX Technologies 0E-RCKMT1000, Руководство пользователя, Страница: 9 / 40

COPYRIGHT © 2019 ADI 8
1. GENERAL MODE
a. Press the Display toggle button to check the status of the UPS status:
# Items Unit
1 Input Voltage V
2 Output Voltage V
3 Output Frequency Hz
4 Load Kw
5 Load Capacity %
6 Battery Capacity %
7 Estimated Runtime Min
b. If the LCD backlight turns off (enters sleeping mode), press the Display toggle button to wake it up.
2. SET-UP MODE
Step 1:
Press and hold the Display toggle button for 3 seconds to enter the UPS Set-Up Mode.
Step 2:
By pressing the Display toggle, users can switch between setup functions.
Step 3:
Press and hold the Display toggle button for 3 seconds to choose the function you want to adjust.
When the icons blink, the value of each item is changed by slightly pressing the Display toggle
button.
Note: If the function you select is ESC, the UPS will return to Function Menu (Step 2) without any
change.
Step 4:
To save the value and return to Function Menu, press and hold the toggle for 3 seconds.
Note:
If the Display button is not touched for 30 seconds, the UPS will leave Set-up Mode and
return to General Mode without changing any settings.
Programmable functions are sorted as the following table:
Functions Options Description
Output Quality
Low
Low Output Quality means UPS will go to
battery mode less often and tolerate more
utility power fluctuations and vice versa.
Note: It is related to the settings of
High/Low Transfer Point. The LCD shows
“CUSt”, instead of “LInE”, with capacity bar
when High/Low Transfer Point is
modified.
Medium
High
ESC
Customized
LCD SETUP FUCTIONS