manualshive.com logo in svg

WB Mfg SSW100X, Инструкция по сборке, Страница: 2 / 6

Поделиться
Скачать
WB Mfg SSW100X Скачать руководство пользователя страница 2

iXchange Wall System Continued

Assembly 

Instructions

507 E Grant Street, Thorp, WI  54771

P:  800.242.2303     F:  715.669.5929

2

www.wibenchmfg.com  

Step 4:  

Slide pairs of base cabinets together and fasten together with 
joint connector bolts (p/n 0400236) and nut (p/n 0400229). Make 
sure counter tops are pressed together tightly to minimize any 
gap between panels.

Step 5:  

Place the upper cabinets on to base cabinet with the 48” wide 
cabinet (p/n iXW1155-2) in the center and 36” wide cabinets (p/n 
iXW1180-1) on either side.  The holes in the upper cabinets will line 
up with threaded inserts in the countertop.  Bolt into place using 
joint connector bolts (p/n 0400236).

Step 6:  

Bolt upper cabinets together using joint connector bolts (p/n 
0400236) and nuts (p/n 0400229). 

Step 7:  

Bolt one finished end panel (p/n ixFEL) to cabinets using joint 
connector bolts (p/n 0400236).  Holes in cabinets will line up with 
threaded inserts in the end panel. 

continued 

on page 3

Содержание SSW100X







Отзывы:

Нет отзывов