2
wibenchmfg.com
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
Step 5:
• Place top on the 4” L-brackets(leg, right and modesty
panel), align bottom of the top that have the pre-drilled
holes to the brackets that are located on the leg and
right /left legs and modesty panel. Attach the brackets
to the top with (2) #10x3/4” square pan screws per
bracket. Tighten with a #2 square drive screw driver or a
#2 square bit with a screw gun.
Step 6:
• Place cable grommets into hole located on right &
left (center if assembling the adder kit) legs and the
laminate top.
V041819 subject to change.
Study Carrel
Starter Kit
Step
5
Step
6
Assembly Instructions
Before you begin, please make sure all parts and proper quantities are included. (See Part Identifier Key) Any parts damaged during shipment must be
reported within 24 hours of receipt. To report information regarding damages or if you have any questions, please call 800.242.2303.
Item #
Description
1
Laminate top
2
Starter right leg
3
Left leg
4
Modesty panel
5
Cable grommet hole
6
Adder center leg
7
Connector
Part Identifier Key
Part #
Description
Qty.
04009316
Cord channel w/ hem, 872-34” UNE-frame
1
0406711
#10x3/4” black square pan screw
(Used on cord channel and L-brackets)
34
0400900
4” L-Bracket
5
0406659
0406658
23/8” cable grommet
(Used on modesty panel)
31/8” cable grommet
(Used on right, left or center legs)
1
1 - 2
2
5
4
3
1
Starter Kit
Tools Required
• #2 Square drive screw driver or
• Screw gun
• #2 square bit
