14
– Screw the valve connector onto the valve. Always make sure it is fitted correctly prior to use. Press the on/off button
(5) to inflate the tyres.
Inflating other products
– To inflate other products, always use one of the supplied adapters (10) together with the valve connector (9).
– First, loosen the box nut (7) on the pump by turning it anti-clockwise.
– After loosening the box nut, push and turn the valve connector (9) until it is securely fitted into the air outlet opening.
Always make sure it is fitted correctly prior to use.
– Retighten the box nut (7) by turning it clockwise.
– Attach an appropriate adapter (10) to the end of the valve connector (9).
– Press the on/off switch (5) to inflate the product.
Note: On the back of the compressed air pump there is a built-in pressure gauge (8). Never exceed the specified
pressure when inflating tyres / products. The built-in pressure gauge is not calibrated! Always use a calibrated pressure
gauge to check the correct tyre pressure before using a car / bicycle.
8. cleAnIng AnD cAre
Caution: Always disconnect the plug before cleaning electrical equipment!
– Only clean electrical equipment with a moist cloth and never use abrasive cleaning agents.
– Clean the device and the ventilation slots regularly to prevent the build-up of dust and dirt.
– The cleaning frequency depends on the amount and frequency of use.
– Never dismantle the device for cleaning if the device or components are not intended to be dismantled.
– Caution! Keep the device away from liquids and make sure that water never enters the housing.
– After cleaning, store the device and accessories in a dry place protected against dust and dirt.
– Allow the compressed air pump to cool down, and always remove the rechargeable battery pack before cleaning
the pump.
– Check the battery terminals at regular intervals.
9. ce DeclArAtIon of conformIty
The product has been designed to comply with the basic health and safety requirements of the relevant EC directives
and standards for this device. The CE declaration of conformity is either included as a separate document with the
product or can applied for in writing from the following companies:
wb compagnie GmbH
Dr.-Georg-Schaefer-Str. 30
93437 Furth im Wald
Germany
