Shenzhen Waytronic Electronics Co., Ltd
PowerSound-HIFI
Button
Function Realized
1
Switched to PIR function mode
2
Switched to MP3 repeat mode without PIR function
3
Previous
4
Next
5
Volume up
6
Volume down
Notes:
1. As there are two buttons differing from the other 4 buttons on the remote control not only in appearance but
also in the coding rules, it decides you need to do remote control coding learning three times at least till the
remote control can be used normally.(Normally users don’t need to do remote control coding learning job again,
since it is paired with the host well before delivery, unless when the battery in the remote control runs out of
power and you need to replace it).
2.The functions for the buttons can be customized according to customers’ needs.
4. Sound Files Uploading
Reminder: When you upload sound files(MP3 format only) into the internal flash memory using a USB drive,
you can only put the sound files needed in the USB drive via computer and you can’t put other files, otherwise
the uploading or copying from the USB drive to the internal flash memory can not be done.
Operational Steps:
1. Put the prepared sound files in the root directory of your USB drive on computer. Normally it is not
required to rename the sound files on computer, which will be copied into the internal flash memory of the
host device in the way of original storage order. If you are strict to the order, you can copy your sound files
one by one from computer to your USB drive according to the order you want.
2.
Insert the USB drive to the USB port of the device, and long press the button V+/C till the indicator
flashes continuously. When the copying is done, the indicator turns off automatically.
Notes:
1. The total capacity of the sound files can not be larger than the internal flash memory, otherwise the copying
will fail.
2. The USB port on the host device doesn’t support connecting with computer for sound loading.
4
