Shenzhen Waytronic Electronics Co., Ltd
MicroSound M14
https://www.waytronicmfg.com/
2
3. Panel introduction
No.
Function
Function introduction
1
PIR motion sensor
Human body inductive probe
2
Indicator light
Recording and playing indicator
3
Button A
Short press to play; press again to stop
Long press 2s, start to record when hearing a “di” sound; press the button
again to stop recording with a “di-di” sound
4
Power on/off switch
To the bottom is switch off, to the top is switch off
5
Recording hole
Microphone recording hole
6
Button B
Short press to play next audio
Short press twice, adjust volume(3 levels in circle, in highest volume, you
will hear a "di" sound)
Long press B button 2 seconds, to delete the current
recording, if you
want delete all the recording, you need to delete one by one
7
Speaker
Sound output
Note: when recording, shall start to record what you need after hearing a “di” sound.During its recording, long
press the recording button all the time. To save the recorded voice completely, after finishing recording, wait a
moment,then release the recording button.
4. Installation and user guide
4.1 Installation Requirements
1) Shall be installed indoor, not recommended for outdoor applications.
2) Do not be installed near the high-power electrical appliances and switching devices.
3) Do not be installed under or next to the air conditioner.
4) Do not be installed in the environment with large temperature change. There shall be no heat source in front of
the detection direction. Otherwise, the machine will give false alarm.
