Shenzhen Waytronic Electronics Co., Ltd
KingSound V2.03
4
Note:
1. When voice length is more than relay off-delay time, if the time is up, relay will switch off and voice will
keep playing until finishing its play.
2. With power on, about one minutes later, it can play voice normally. In the process of powering up, do not
align the probe with the heat source or human body, that is, when the red light is off, it can be used normally
3. In the state of close, relay will switch off with key pressed.
4. Direction recognition must be from the side of the induction range to the
other side, and must be outside of the induction range. Just moving within the
induction range all the time will cause inaccurate direction recognition. Distance
to identify the direction is within 5 meters; over 5 meters there will be no direction
recognition or in the opposite direction.
7.
Downloading voice
A.
Copy MP3 format audio files to the root directory of U disk(only voice can be stored in U disk, no any other file).
If there are special requirements, users need to copy file to the U disk one by one.
B.
Send Config.txt to U disk. How to create Config.txt:
First, create a new notepad on the computer, changing the file-name to Config. Open this file and set as below:
sp00: sp are small English letters, which means no play with power up. Behind “//”must be reserved.
cl00: cl are small English letters, which means no loop play. Behind “//”must be reserved.
cf : cf are small English letters, which are the relay off-delay setting marks. Behind “//”does not need to be
reserved.
Then, save files and close it after finishing settings.
C.
Insert U disk to the host USB interface.
D.
Long press both M1 and M2 button for 3 seconds at the same time. When red LED indicator flashes, start to
copy voice.
After finishing the copy, the red light stops flashing.
They are the relay closure time. The first “10” means that closure time is 10
seconds; the second “10” means checking again. This two kinds of time must be
the same. Behind English letters, there must be blank between each two
numbers. Off-delay time is 00s-99s.
This byte is interval time between the two body induction triggering. 06 means
that it takes 6 seconds from finishing voice play to triggering play again,
triggering interval time is 05-99S.
00: means that outside triggering play is the audio selected by VOL+ button
01: means that outside triggering play is the audio selected by VOL- button
