Shenzhen Waytronic Electronics Co., Ltd. iSoundII V3.06
- 2 -
3.Specification
Working voltage: AC100~250V or DC12V (two of them can not compatible )
Load:
≤600W(Resistive Load)
Human Sensing angle:
≤120 degree
Direction recognition distance: 4meters
Working Environment:
Only used indoor(-20
℃～
35
℃
), relative humidity less than 95%
Product size:
86*86*41(mm
4.Terminals Instruction
◆
NO
and
COM
terminals are switch of relay. It will close when trigger playing;
◆
L
and
R
terminals separately are left channel and right channel;
◆
TG
is external trigger terminal, valid for low level.
Note: This power supply has two kinds: AC 100
～
250V or DC12V. Before powering, see terminal mark clearly,
avoiding wrong connection to damage product.
5.Download Voice
Step1: Copy MP3 audio files to the root directory of U disk (U disk only can store MP3 audio files, no other files
or folders). If there are special sequence requirements, need copy one by one to U disk.
Step 2. Insert U disk to the USB interface of product bottom.
Step 3. After power on, long press M1 & M2 for 3 seconds at the same time. When red LED indicator light
flashes, release the buttons, start to copy voice. After finishing copying, red indicator light stops flashing
