wayscral KICKWAY E1, Руководство пользователя, Страница: 66 / 269

66/269
Entering the code to unlock the scooter
1. Press the On/Off button for 3 seconds to turn on the scooter.
2. Enter the code using the buttons on the control panel.
3. The cursor goes on the first digit of the code, its value can be
increased or decreased using the "+" and "-" buttons. Briefly
press the On/Off button to confirm and move to the next digit of
the code.
4. Press the On/Off button twice quickly to confirm and move to the
next digit of the code.
Activate the lock code
•
Turn on the scooter as described above.
•
Press the On/Off button and the "+" button simultaneously for 5
seconds to activate/deactivate the lock code function.
Change the lock code of the scooter
• Press the On/Off button for 3 seconds to start the scooter.
•
Enter the initial code to unlock the scooter
• Press the On/Off button and the "-" button for 10 seconds to
reset the lock code.
•
The cursor moves to the first digit of the code. Its value can
be increased or decreased using the "+" and "-" buttons.
Briefly press the On/Off button to confirm and move to the
next digit.
•
Press the On/Off button twice briefly to confirm the new code.
III. Control buttons
1. The control button panel is on the left side of the handlebars
2. On: press the On/Off button briefly to turn on the scooter.
3. Off: press the On/Off button for 3 seconds to turn off the
scooter.
4. Lights: press the "+" button for 2 seconds to turn on/off the
front and rear lights
5. Speed modes: once in motion, press on the "+" or "-" button
to change the speed mode
• L1: maximum speed 6 km/h,
•
L2: maximum speed 12 km/h