3
Operating Instructions And Parts Manual
1.
Tether Float Switch Kit
60022-001
60022-001
2.
Top Cover Kit
60030-001
60030-001
3.
Impeller Plate
15958
15958
4.
Impeller
60000-001
60000-001
5.
Volute
60016-001
60007-001
Part Numbers for Models
Ref.
CDT33
SPT33, SPT50
No.
Description
CDT50
SSPT33, SSPT50
For Replacement Parts, call 1-800-237-0987
Please provide following information:
-Model number
-Serial number (if any)
-Part description and number as shown in parts list
Address parts correspondence to:
Wayne Water Systems
101 Production Drive
Harrison, OH 45030
Specifications
Power supply requirements......120V, 60 hz
Motor .........................................Single phase, oil filled
Horsepower................................1/3 HP (CDT33, SPT33, SSPT33)
....................................................1/2 HP (CDT50, SPT50, SSPT50)
Liquid temperature range ........40°F to 120°F
Circuit requirements..................15 amps (min)
Dimensions.................................11
1
/
2
” high x 9
3
/
4
” base
Cut-in level (factory set)............13”
Cut-out level (factory set) .........7”
Construction
Motor housing .................Cold rolled steel
Volute ...............................Cast iron (CDT33, CDT50)
..........................................Glass Reinforced Thermoplastic
(SPT33, SPT50, SSPT33, SSPT50)
Impeller ............................Glass reinforced thermoplastic
Shaft .................................Low carbon steel
Seals ..................................Buna N
Discharge..........................1
1
/
2
” NPT
Motor Cover .....................Glass reinforced thermoplastic
Replacement Parts List
•
Only use factory parts to repair
this pump.
www.waynewatersystems.com