Tools Needed:
17
Please Do Not return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section
online at www.Wayne-Dalton.com
INST
ALLA
TI
oN
OPERaTOR
BRaCkET
u-BaR
OPERaTOR BRaCkET IN
PlaCE uNDER u-BaR
(6) 1/4” - 20 x 5/8”
sElF-DRIllING
sCREWs
TOP sECTION
OPERaTOR
BRaCkET
u-BaR
1/4” - 20 x 7/8”
sElF-DRIllING sCREWs
sIDE VIEW OF u-BaR ON TOP
sECTION
u-BaR
11
Power Drill
7/16” socket
Driver
operator Bracket
NoTE:
If installing a trolley type
operator, complete this step. If not, skip
this step and continue with step 12.
IMPorTANT:
WHEN CONNECTING a
TROllEy TyPE GaRaGE DOOR OPENER
TO THIs DOOR, a WayNE-DalTON
OPENER / TROllEy BRaCkET MusT
BE sECuREly aTTaCHED TO THE TOP
sECTION OF THE DOOR, alONG WITH
aNy u-BaRs PROVIDED WITH THE
DOOR. THE INsTallaTION OF THE
OPENER MusT BE aCCORDING TO
MaNuFaCTuRER’s INsTRuCTIONs aND
FORCE sETTINGs MusT BE aDjusTED
PROPERly.
Remove, but retain (4 - 6) 1/4” - 20 x
7/8” self-drilling screws from the center
of the u-bar, allowing the operator
bracket to slide between the top section
and the u-bar.
NoTE:
For retro fit applications, the
operator bracket must be aligned with
an existing operator
locate the center of the top section and
slide operator bracket under u-bar till
the operator bracket is seated against
the u-bar flange. attach the operator
bracket using (6) 1/4” - 20 x 5/8”
self-drilling screws (as shown). Finish
re-attaching the u-bar using the self-
tapping screws removed previously.
TOP sECTION
TOP sECTION
