Table of Contents
Package Contents ............................................................................... I.
Pre-Installation Inspection ................................................................... II, III
Tools Needed ...................................................................................... IV.
Important Safety Instructions .............................................................. V.
Retro-Fit Installations .......................................................................... 1-6.
idrive
®
for Torquemaster
®
Installation ................................................. 7-22.
Pre-Operation ...................................................................................... 22-33.
Operation ............................................................................................ 34-39.
Maintenance ....................................................................................... 39.
Programming Wireless Wall Stations or Transmitters to Opener .......... 41.
Troubleshooting ................................................................................... 42-43.
Warranty ............................................................................................. 44.
Customer Service Number .................................................................. 45.
INCORRECT INSTALLATION CAN
LEAD TO SEVERE OR FATAL
INJURY. FOLLOW THESE
INSTRUCTIONS CAREFULLY.
IMPORTANT SAFETY
INSTRUCTIONS
1. READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.
2. Do not connect the opener to electrical power until instructed
to do so.
3. Install the entrapment warning label next to the wall station in
a prominent location. Install the emergency disconnect label
next to the emergency disconnect.
4. Remove all ropes and remove, or make inoperative in the unlocked
position, all locks connected to the garage door before installing
the opener.
5. Do not wear rings, watches or loose clothing when installing
or servicing a garage door system.
6. It is important that you install all the components supplied with the
idrive
®
opener, i.e., wall stations, safety sensors, etc. Use
of parts not supplied by Wayne-Dalton Corp. may cause the
opener to malfunction and create unsafe conditions.
7. Wear safety glasses for eye protection when installing or servicing
the opener or door.
8. Install opener on a properly balanced and operating garage
door. Have a qualified service person make adjustments/repairs
to cables, spring assemblies, and other hardware before
installing the opener. An improperly balanced door could
cause severe injury.
9. Where possible, install the opener seven feet or more above the
floor. Mount the emergency disconnect six feet above the floor.
10. Locate the wall station: (a) within sight of door, (b) at a minimum
height of five feet, so small children cannot reach it, and (c) away
from all moving parts of the door.
11. After installing the opener, the door must reverse when it contacts
a 1-1/2” high object (or 2 x 4 board laid flat) on the floor.
12. Installation and wiring must comply with local building and
electrical codes. Connect the power cord to a properly grounded
outlet. Do not remove the ground pin from power cord.
AFTER INSTALLATION IS COMPLETE,
FASTEN THIS MANUAL NEAR GARAGE
DOOR. PERFORM MONTHLY OBSTRUCTION
TEST AND MAINTENANCE AS
RECOMMENDED. SEE PAGES
32, 33 AND 39.
WARNING
V
Please Do Not Return This Product To The Store.
Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.
You can reach us Toll Free at
1-888-827-3667
for Consumer Assistance or online at
www.wayne-dalton.com
Defi nition of key words used in this manual:
INDICATES A POTENTIALLY HAZARDOUS SITUATION
WHICH, IF NOT AVOIDED, COULD RESULT IN SEVERE
OR FATAL INJURY.
CAUTION:
PROPERTY DAMAGE OR INJURY CAN RESULT FROM
FAILURE TO FOLLOW INSTRUCTIONS.
IMPORTANT:
REQUIRED STEP FOR SAFE AND PROPER DOOR
OPERATION.
NOTE:
Information assuring proper installation of the door.
WARNING
