10
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer
section online at
www.wayne-dalton.com
Tools Needed:
4
Drums
IMPORTANT:
RIGhT AND LEfT hAND IS
ALWAyS DETERMINED fROM INSIDE ThE
GARAGE LOOkING OuT.
NOTE:
for door section identification see
page 4.
TorqueMaster
®
Plus counterbalance
drums are marked right and left hand.
uncoil the counterbalance cables and
make sure you place the right hand
cable loop on the milford pin of the right
hand bottom corner bracket. Place the
left hand cable loop on the milford pin of
the left hand bottom corner bracket.
Insert a roller into each bottom bracket
of the bottom section.
NOTE:
Verify astragal (bottom seal)
is aligned with door section. If there
is more than 1/2” excess astragal on
either side, trim astragal even with door
section.
LEfT hAND
TORquEMASTER
®
PLuS
COuNTERBALANCE DRuM
BOTTOM SECTION
MILfORD PIN
BOTTOM SECTION
ASTRAGAL
None
ROLLER
hINGE TuBE
BOTTOM
BRACkET
MILfORD PIN
COuNTERBALANCE
CABLE
