Wayne-Dalton 523RX Скачать руководство пользователя страница 3

©Copyright 2020 Wayne Dalton, a division of Overhead Door Corporation

3

500367.0001 NEW 10/08/2020

Potential Hazard

Effect

Prevention

MOVING DOOR

 WARNING

Could result in Death 

or Serious Injury  

Keep people clear of opening while Door is moving.

Do 

NOT

 allow children to play with the Door Operator.

Do 

NOT

 operate a Door that jams or one that has a broken spring.

ELECTRICAL SHOCK

 WARNING

Could result in Death 

or Serious Injury 

Turn 

OFF

 electrical power before wiring switch and motor to supply. 

HIGH SPRING TENSION

 WARNING

Could result in Death 

or Serious Injury 

Do 

NOT

 try to remove, install, repair or adjust springs or anything to which door spring parts are fastened, such as, 

wood blocks, steel brackets, cables or other like items.

Installations, repairs and adjustments must be done by a trained door system technician using proper tools and 

instructions.

OVERVIEW OF POTENTIAL HAZARDS

READ THIS SAFETY INFORMATION

SECTION 1 - SAFETY INFORMATION

Upward Rolling Doors doors are large, heavy objects that move with the help of electric motors.  Since moving objects and electric motors can 

cause injuries, your safety and the safety of others depends on you reading the information in this manual.  If you have any questions or do 

NOT understand the information presented, call technical support at 1-800-764-1457. 

WARNING

In this section and those that follow, the words "

DANGER

", "

WARNING

", and "

CAUTION

" are used to stress important safety information.  The 

word:

DANGER

 indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

 indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

 indicates a potentially hazardous situation which, if not avoided, may result in injury or property damage.

The word

 

NOTE

 

is used to indicate important steps to be followed or important considerations

.

Содержание 523RX






















Отзывы: