©Copyright 2020 Wayne Dalton, a division of Overhead Door Corporation
19
500367.0001 NEW 10/08/2020
WARNING LABEL
STEP 10
STEP 10
PLACE WARNING LABEL
SECTION 7 - FINAL INSTALLATION
• Place warning label on drive side guide at eye level. See FIG 24.
FIG 24
10/01/2015
356857 REV -
MOVING door could
result in death or
serious injury.
Do NOT close door
until doorway is clear.
1. Control the speed of the door
during manual operation.
2. Do not stand or walk under
moving door.
3. Keep doorway clear and in full
view while operating door.
4. Do NOT permit children to play
on, near, or with door or to
operate controls.
5. Unlock door before opening
door.
6. Sensing devices on motor
operated doors should be tested
frequently.
7. Adjustments or repairs must be
made by a trained door systems
technician using proper tools and
instructions.
8. Visually inspect door and
hardware monthly for worn
and/or broken parts and check to
see if door operates freely. DO
NOT operate a door with a
broken spring.
SAFETY INSTRUCTIONS
WARNING
Place label at a readable height
on door drive side guide or jamb.
Do NOT remove, cover, or paint
over label.
This label should be inspected
periodically for legibility, and a
replacement label should be
ordered from the door manufac-
turer as needed.
