SOLAR PANEL MOUNTING: GROUND STAKE & WALL MOUNTED ARE AVAILABLE
WALL MOUNED
GROUND STAKE
SOLAR STRING LIGHT INSTALLATION
(1) Use a power drill (not included) to create the holes on your chosen mounting surface.
Use 2 of the included wall plugs(H) and long screws(G) to fasten the mounting bracket(E) to the surface.
(2) Attached the mounting base( D) onto the back of solar panel, turn it until lock up securely. Use the short screw(F)
to tighten the connection.
(3) Slide the solar panel down onto the mounting bracket until you feel and hear the connection click into place.
(4) Adjust the solar panel to the desired angle to optimize sun exposure.
To utilize the ground stake
（
C
）
connect the two parts of the stake together.
The grooved section then fits into the protruding arm of the solar panel.
Finally push the stake partially into the ground.
SOLAR PANEL & STRING LIGHT CONNECTION
connect the string light to solar panel by the arrow indicating on the male(from string
light) and female (from solar panel) connector. Screw the seal cover from extended wire
of the solar panel until tight.
Guide wire installation:
Use the build-in hooks to hang the string light into the
pre-installed guide wire (not included).
hang onto the tree directly:
hang onto the railing directly:
ON
OFF
1
2
3
3
Female Connector
Grooved Section
Seal Cover
Male Connector
The soar string light has a variety of possible ways to be mounted. The following are examples of the most common ways.
