6
Notes:
Ÿ
If more than one source is connected, the optional DRC remote is required to change between sources.
Ÿ
The SDSP PC software is only recommended for use with authentic licensed versions of Windows.
Ÿ
All specifications are subject to change without notice.
DSP Features & Specifications
DSP Resolution
Sampling Rate
Signal Converters
A/D and D/A
Input Source Select
via PC or DRC
Main (High Level)
AUX, BT, Optical, Coax
Main (High Level)
AUX, BT, Optical, Coax
Output Channel Assignments
Front
Rear
Center
Subwoofer
Filter Model
Filter Type
Filter Range
Filter Slope
Main
Sub
Each Channel
Delay Range
Increments
Phase
Shift Range
Type
Freq (Fc) Range
Boost/Cut Range
Q Range
Preset Memory
Software Interface
-40dB to +12dB
0dB to +12dB
SDSP68
up to 8 (POS1-POS8)
Windows PC Required (Windows 8 &10)
Time Delay
0-15ms, 0-519cm, 0-204in
0.01ms, 0.35cm, 0.14in
0
°
to 360° (1° steps)
EQ
31-band Parametric
20Hz to 20kHz
+/-15dB
0.3 to 15 (in 0.1 steps)
-40dB to 0dB
Input Channel Routing
Null, FL, FR, RL, RR, SUB L, SUB R
M1=FL+FR, M2=FL+RL, M3=FR+RR
M4=FL+RL+SUB L, M5=FR+RR+SUB R
Null, Left, Right, M1=Left+Right
Front, Rear, Center, Subwoofer (CH7/8)
Output Channel Pre-set
Crossover Configurations
Full, Tweeter, M-T, Midrange, M-WF, Woofer
Full, Tweeter, Woofer
Full, Tweeter, Woofer
Subwoofer (stereo), Full, SubwooferS (mono)
Crossover
Linkwitz, Bessel, Butterworth
Off, HP, BP, LP
20Hz to 20kHz
Linkwitz = -12, -24, -36, -48dB/oct.
Bessel = -12, -24, -36, -48dB/oct
Butterworth = -6, -12, -18, -24, -36, -48dB/oct
Trim Level (Gain)
Input Channel Setting
2ch, 4ch, 6ch, Mix (Mono, 2-way or 3-way sum)
32-Bit
96kHz
Burr-Brown
Main (High Level or RCA), AUX, BT, Optical, Coax
2ch