Wavtech link300.4mini, Руководство пользователя

Страница: 6 / 8

CH3(L) CH4(R)
BRIDGED
CH1(L) CH2(R)
GND REM +12V
CH3(L) CH4(R)
BRIDGED
CH1(L) CH2(R)
GND REM +12V
CH3(L) CH4(R)
BRIDGED
CH1(L) CH2(R)
GND REM +12V
5
4-Channels 3-Channels ( Bridged)
Speaker Output Terminal Wiring:
2 Ω
(min)
2 Ω
(min)
2 Ω
(min)
2 Ω
(min)
2 Ω
(min)
2 Ω
(min)
4Ω
(min)
2-Channels (Bridged)
4 Ω
(min)
4 Ω
(min)
RCA Input Wiring: Speaker Level Input Wiring:
CH1
(L)
CH2
(R)
CH4
(R)
CH3
(L)
Note: For a 2-channel source, connect to CH1/2 inputs and select copy (1/2) with CH3/4's INPUT CH switch. If
separate gain control is desired for CH3/4, use RCA y-adapters or jumper wires to connect CH1/2 to CH3/4's
inputs externally and select direct (3/4) with CH3/4's INPUT CH switch.
Note: After checking all wiring and connections, make all initial settings and adjustments before turning on the
amplifier to avoid damaging the connected speakers. Gains should always start at minimum with the appropriate
input range selected for your aftermarket or OEM source's maximum output voltage. For smaller speakers,
always activate the HP filter and set the cut-off frequency to protect them from being over-driven.